Transpack Euro-Asia Packing Machinery Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Xu Nathan
  • Company Name : Transpack Euro-Asia Packing Machinery Co., Ltd.
  • Tel : 86-21-54892311
  • Fax : 86-21-54892312
  • Address : Shanghai,shanghai,13F,Honghui Plaza,No.468 Caoxi North Rd,Xuhui District,Shanghai,China
  • Country/Region : China
  • Zip : 200030

TP-ETEB-A4000 Automatic Egg Tray Making Machine

TP-ETEB-A4000 Automatic Egg Tray Making Machine
Product Detailed
Egg Tray Making Machine 1)Production capacity is 4000 pcs/hour 2)Can produce many kinds of products 3)Low cost of operation

TP-ETEB Automatic Egg Tray Making Machine

    The forming machine is the main equipment for make the paper pulp moulding products, it adopt water as medium, adopt vacuum attach method,use different form mold, make different form products.

    The forming machine correspond with TP-ETEB production line is use rotary attach method, every kinds of forming mold would be used, especially the forming mold like the bring lid egg box which is concave attach, it have more advantage for use this equipment than use coordinate form, fluctuate form, to-and-fro form forming machine. after the forming mold rotary go into pulp tank, and rotary leave the pulp tank, so even the forming mold is concave(for instance: bring lid egg box forming mold), it won’t bring out the phenomenon that there are spilth paper pulp serous in the mold, the bring lid egg box or other products will have equality thickness,short dehydrate time. They’re spray equipment spray water to the forming mold when the forming mold leave paper serum, to brush off the product’s bur, made the products’ edge more lubricity, appearance formation. And spray out the Superfluous paper pulp cling to the forming mold edge, keep the location where the forming mold conjugate with shift mold. keep precision of join mold. after forming, the automatism shift institution and shift mold will lay the products onto the dry conveyer blandly, products distort diminutively.

Model

TP-ETEB-A2000

Egg tray pcs(pcs/hr.)

2000

Max. output(kg/hr.)

200

The whole product line power(kwh)

138

Electricity cost(kwh)

105

Diesel oil cost(kg/hr.)

38

Gas cost(cube/hr.)

49

Steam cost(kg/hr.)

800

Water cost(litre /hr.)

800

staff

5

Forming machinemovement periods

Egg tray:10-11 sec.

other:12-30 sec. adjustable

Forming machine board size(mm)

1600x500x2

Mould

Forming mould 8 pcs

Transfer mould

8 pcs

Operation

Control by PLC computer,run automatically

Common explaination

1,In the above form,the parameter of the cost of diesel oil,gas ,steam are corresponding to different heat sources,the othes are omitted .

2,The pieces of the egg tray in the form are just for reference,different product,different quantity and weight.

ITEM

CONTENT

Working method of forming machine

Rotary forming, controlled by PLC microcomputer

Forming machine mould size

Each side-forming machine all is :1600×660mm,4 mould cavities, may install 4 sets surface plate egg tray mould or 8 sets bring lid egg box mould

Forming machine work cycle

Surface plate egg tray:12-14 second/one time/one side, bring lid egg box:17-19 second/one time/one side

Product adaptation scope

Could use each kind of different shape raised mould or concave mould to attracts the paper pulp to moulding each kind of different shape product

Drier

DW1.6×32 1 set. Effective heating zone:1.6m×28m

Drier temperature

Partition section to control temperature (divides four sections) 120°C——170°C could to be adjusted

Drier conveyor speed

0.5M——6M/min,adjust the speed having no caste

The heat way of the drier

The drier itself bring straight burn type natural gas hot-blast stove:200000 kcal/h type/4set

Drier drying power

Each hour dry dehydration volume is 400—450kg.

hot-pressing reshaping machine

Air pressure drive, heating and pressing under mould could move outside, the handiwork to put the material, automatically full the material

Hot-pressing reshaping machine platen size

920×450mm,may install three sets bring lid egg box heating and pressing mould

Hot-pressing reshaping machine operating temperature

120°C——170°C may to be adjusted

Hot-pressing reshaping machine heating way

Electric heating(10kw/dais)

Production line install equipment total power

Not include the air compressor for:150kw

Product 15.5-25Ibs egg trayAll types of egg trayAll types of egg carton

TP-ETEB-A4000 Automatic Egg Tray Making Machine



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.